High speed 4000 rpm CNC lathe machine CK6140 small cnc lathe with Fanuc Controller

Short Description:

1.Spindle adopts high precision rolling bearings, high precision rotary plate aspect to adopt high precision ball screw transmission, good dynamic performance, precision positioning.
2.The machine tool guide with wear-resistant cast iron and after the audio quenching, the hardness of the HRC45 above, can ensure
the long-term stability of processing accuracy.

Send email to us

Product Detail

Product Tags

Product Description

CNC Lathe Machine Features:

1.Longitudinal and cross feeds are effected by ball leadscrews driven by servo motors.

2.Either vertical 4-station or horizontal 6 and 8-station tool post as well as gang type tool post can be selected.The post is located on precision contrite gears with a high repeated positioning accuracy.

3-Both chuck and tailstock are available with hydraulic or manual or pneumatic type.

4.The spindle system is high in rigidity and accuracy.

5.The surface of the bedways is supersonic frequency hardened and precision ground with a long service life.

◆This series of machine tools is a mature product mainly exported by WOJIE CNC Machinery Co., Ltd. The whole machine has a compact structure, beautiful appearance, large spindle torque, high rigidity, stable and reliable performance, and excellent accuracy retention.

◆Optimized design of the headstock, suitable for turning of disc and shaft parts. It can process straight, arc, metric and inch threads, and multi-threaded. It is suitable for turning discs and shafts with complex shapes and high precision requirements. Parts Processing.

◆Both the machine tool guide rail and the sliding saddle guide rail adopt hard guide rails of special materials, which are super hard and wear-resistant, durable, and have good machining accuracy retention after high-frequency quenching.

◆The numerical control system adopts GSK980TC3 and servo drive of Guangshu system, and adopts domestic famous and high-quality ball screw and high-precision screw bearing.

◆The spindle adopts high-precision spindle bearing set and has been precisely assembled and dynamically balanced to ensure that the spindle has high precision, low noise and strong rigidity. ◆Each lubrication point adopts a forced automatic lubrication device for fixed-point and quantitative lubrication of the lead screw and guide rail. When there is an abnormal state or the amount of oil is insufficient, a warning signal is automatically generated.

◆Use domestic 250 manual chuck.

◆The guide rail is equipped with a scraping device to prevent the guide rail from being corroded by iron filings and coolant, and to facilitate the cleaning of the iron filings.

technical specifications

pecifications	Units	X6132
Table size	mm	1325x320
Table load	kg	500
T slot(number-width-pitch)	mm	3-18-70
Table travel	mm	700/680 255/240 320/300
Range of table feed	mm /min	XY:23.5-1180 Z:8-394
Rapid speed of table	mm /min	XY:2300 Z:770
Spindle taper		ISO50 7:24
Spindle speed range	rpm	30-1500 (18 steps)
Swivel angle of table	°	±45
Distance between spindle axis and table surface	mm	30-350
Spindle motor power	kw	7.5
Feed motor power	kw	1.5
Weight	kg	2700/3000
Overall dimension	mm	2300×1770×1700
Motor of table power feed	kw	0.75
Up/down motor of headstock	kw	1.1
Coolant pump motor	kw	90
Speed of coolant pumps	L/min	25
Overall dimension	mm	260021002300
N.W./G.W.	kg	2500/2700

Standard accessories

GSL980TB3 or GSK980TDC control system
Electric 4 position tool post
3-jaw manual chuck
Spindle hole 52mm
Manual tailstock
Low-high two steps spindle speed

Optional Accessories

Siemens ,Fanuc ,SYNTEC and other control system
3-jaw manual chuck
Spindle hole 80mm
Hydraulic chuck
6/8 electric turret
Hydraulic tailstock
Indepedent spindle
Automatic chip conveyor

Detailed Images

Company Introduction

Packing&Shipping

FAQ

1. What is the payment Terms ?
A : T/T ,30% initial payment when order ,70% balance payment before shipment ;Irrevocable LC at sight .
When we receive the advance payment, we will start to make production.when the machine is ready , we will take pictures to you.after we got your balance payment. we will send the machine to you.

2: What's your main products of your company?
A: We specialized in all kinds of machines ,such as CNC Lathe Machine ,CNC Milling Machine ,Vertical Machining Center ,Lathe Machines ,Drilling Machine ,Radial Drilling Machine ,Sawing Machine ,Shaper machine,gear hobbing machine and so on .

3.When is the delivery time?
A: If the machine you will order is standard machine, we can ready the machine within 15 days. if some special machines will be some longer. The ship time is about 30 days to Europe, America. If you are from Australia, or Asia, it will be shorter. You can place order according to delivery time and ship time.we will give you the answer accordingly.

4. What is your trade terms?
A : FOB, CFR,CIF or others terms are all acceptable.

5. What is your minimum order quantity and warranty?
A: MOQ is one set, and warranty is one year.but we will offer lifetime service for machine.

6. What is the package of the machines?
A: The machines standard will be packed in plywood case.